Determining an Efficient Solvent Extraction Parameters for
Re-Refining of Waste Lubricating Oils
Keywords: Waste Lubricating Oil Recycling, Solvent Extraction Parameters.
Mehran University Research Journal of Engineering & Technology
Volume 31 , Issue 2
Hassan Ali Durrani , Muhammed Ibrahim Panhwar , Rafique Akthar Kazi ,
References
| 1. |
El-Din, O.I.S., Hassan, S.I., Taman, A.R., Farog, A.S.,
"Recovery of Waste Lubricating Oil by Solvent
Extraction", Hungarian Journal of Industrial Chemical
No. 15, pp. 357-364, 1987. |
| 2. |
Reis, M.A., Jeronimo, M.S., "Waste Lubricating Oil Re-
Refining by Solvent Extraction Flocculation", A Scientific
Basis to Design Efficient Solvents, Industrial Engineering.
Chemical Research, Volume 27, pp. 1222-1228, 1988. |
| 3. |
Saunders, J., "Used Oil Refining Revolution?", Lubricants
World, pp. 20-24., 1996. |
| 4. |
Chementator, "Solvent Extraction Process Recycles
Waste Oil", Chemical Engineering, Volume 103,
pp. 8-19, 1996. |
| 5. |
Lai, H.H., "Minimization of Waste Oil in Oily Sludge by
Solvent Extraction", M.Sc Dissertation, Lamar
University, 1989. |
| 6. |
Dang, G.S., "Rerefining of Used Oils: A Review of
Commercial Process", Journal of Wiley Inter Science,
Volume 3, No. 4, pp. 445-447, March, 2006. |
| 7. |
Khelifi, O., Giovnna, F.D., Vranes, S., Lodolo, A., and
Miertus, S., "Decision Support Tool for Oil Re-Generation
Technologies Assesment and Selection", Journal of
Hazardous Materials, Volume 137, pp. 437-442, 2006. |
| 8. |
Siddiquee, R.M.M., Samdani, T.A., and Kabir, K.B., "Effect
of Operating Variables on Regeneration of Base Oil from
Waste Oil by Conventional Acid-Clay Method", Chemical
Engineering Research Bulletin, Volume 12, pp. 24-27,
2008. |
| 9. |
Elbashir, N.O., Al-Zahrani, S.M., Abdul Mutalib, M.I.,
and Adnan, "Recycling of Used Lubricating Oil by Solvent
Extraction", A Guideline for Single Solvent Design,
Proceedings of RSCE97, Volume 1, pp. 420-427, Johar,
Malaysia, 1997. |
| 10. |
Rincon, J., Canizares, P., and Maria, T.G., "Regeneration
of Used Lubricant Oil by Ethane Extraction", Journal of
Super Critical Fluids, Volume 39, pp. 7854-7859, 2005. |
| 11. |
Sherman, J.H., "Removal of Transition Metals from
Motor Oil Using Ion Exchange Resins", Environmental
Technology, Volume 14, No. 11, pp. 1097-1100, 1993. |
| 12. |
Elbashir, N.O., “The Effect of Design Parameters on
the Solvent Extraction Performance for Recycling of
Used Oilâ€, M.E. Thesis, University of Technology
Malaysia, 1998. |
| 13. |
Reis, M.A., and Jeronimo, M.S., "Waste Lubricating Oil
Re-refining by Extraction-Flocculation 2A Method to
Formulate Efficient Composite Solvents", Industrial
Engineering Chemical Research, Volume 29,
pp. 432-436, 1990. |
| 14. |
Elias, H.G., "Macromolecules, Polenum", First Edition,
Volume 1, pp. 205-210, New York, 1997. |
| 15. |
Reis, M.A., and Jeronimo, M.S., "Waste Lubricating Oil
Re-Refining by Solvent Extraction Flocculation", A
Scientific Basis to Design Efficient Solvents, Industrial
Engineering Chemical Research, Volume 27,
pp. 1222-1228, 1988. |
| 16. |
Nimir, O.M., Abdul Mutalib, M.I., and Adnan, R.,
"Recycling of Used Lubrication Oil by Solvent Extraction-
A Guide for Single Solvent Design", Institute of
Technology PETRONAS, 31750 Tronoh, Perak,
Malaysia, 1997. |
| 17. |
Elbashir, N.O., Al-Zahrani, S.M., Abdul Mutalib, M.I.,
and Abasaeed, A.E., "A Method of Predicting Effective
Solvent Extraction Parameters for Recycling of Used
Lubricating Oils", Journal of Chemical Engineering and
Processing, Volume 41, pp. 765-769, 2002. |
| 18. |
Abdul Mutalib, M.I., Elbashir, N.O., Sahriff, M., and
Adnan, R., "Practical Use of the Solubility Parameters
in Determining Effective Solvent Extraction Parameters
for Recycling Used Lubricating Oilâ€, Proceeding of RSC,
pp. 110-117, Manila, Philippines, 1998. |
| |
|
|