Mehran University Research Journal Of Engineering &
Technology (HEC Recognized In Category "X")
Publishing Since 1982.



For Authors
For Readers
Article Information  
Re-Refining of Waste Lubricating Oil by Solvent Extraction

Keywords: Waste lubricating Oil, Re-Refining.

Mehran University Research Journal of Engineering & Technology

Volume 30 ,  Issue 2

Hassan  Ali  Durrani , Muhammed  Ibrahim  Panhwar , Rafique  Akthar  Kazi ,

References
1. M.El-Fadel, M., and Khouy., R., "Strategies for Vehicle Waste Oil Management: A Case Study", Resources, Conservation and Recycling, Volume 33 pp. 75-91, 2001.
2. Dang,G.S., "Rerefining of Used Oils: A Review of Commercial Process", Journal of Wiley Inter Science, Volume 3, No. 4, pp. 445-457, March, 2006.
3. Vaughn, S.K., "Waste Oil Recovery and Disposal", Noyes Data Corporation, London, 1975.
4. Brinkman, D., Whisman, W., Weinstein, M.W., and Emerson, H.R., "Environmental, Resource Conservation, and Economic Aspects of Used Oil Recycling", US Department of Energy, Washington, 1981.
5. Reis, M.A., and Jeronimo, M.S., "Waste Lubricating Oil Re-Refining by Extraction-Flocculation 2: A Method to Formulate Efficient Composite Solvents", Industrial Engineering Chemical Research, Volume 29, No. 3, 1999.
6. Saunders, J., "Used Oil Refining Revolution?", Lubricants World, 1996.
7. Chementator, "Solvent Extraction Process Recycles Waste Oil", Chemical Engineering, August, 1996.
8. Durrani, H.A., Panhwar, M.I., and Kazi, R.A., "Management of Vehicle Waste Oil in Pakiatan: A Case Study", Mehran University Research Journal of Engineering and Technology, Volume 27, No. 4, pp. 422-440, Jamshoro, Pakistan, October, 2008.
9. Bianco, C., Dl Trdeci, M., and Fisicaro,G., "Agip Petroli- Italy: Review of the Major Processes Used in the Reclamation of Spent Oils", Third Seminar on the Utilization and Marketing in the Arab Countries, pp.19-2, Cairo, 1993.
10. Reis, M.A., and Jernimo, M.S., "Waste Lubricating Oil Re-Refining by Solvent Extraction Flocculation", A Scientific Basis to Design Efficient Solvents, Industrial Engineering Chemical Research, Volume 27, pp. 1222-1228, 1988.
11. Elbashir, N.O., Al-Zahrani, S.M.,Abdul Mutalib, M.I., and Abasaeed, A.E., "A Method of Predicting Effective Solvent Extraction Parameters for Recycling of Used Lubricating Oils", Chemical Engineering and Processing, Volume 41, pp. 765-769, 2002.
12. Nimir,O.M., Mutalib, A., and Adnan, R., "Recycling of Used Lubrication oil by Solvent Extraction: A Guide for Single Solvent Design", Institute of Technology PETRONAS, 31750 Tronoh, Perak, Malaysia, 1997.
13. Audiber, F., "Rerefining and Energy Recovery, Waste Engine Oil [ISBN: 0444522026], Elsevier Science & Technology Books, October, 2006.
14. Lee, L.P., Ripin, A., Rosli, M.Y., and Yee, F.C., "Re- Refining of Base Oil from Usd Lubricant Oil: A Method to Formulate Efficient Potassium Hydroxide (KOH) Effect", 2004.
15. Durrani, H.A., Panhwar, M.I., and Kazi, R.A., "Impact of Operating Variables on Re-Refining of Vehicle Waste Oil to Base-Oil by Acid Clay Process", Mehran University Research Journal of Engineering and Technology, Volume 28 No. 4, pp. 485-490, Jamshoro, Pakistan, October, 2009.
16. Durrani, H.A., Panhwar, M.I., and Kazi, R.A., "Recycling of Lubricating Oil by Using Potassium Hydroxide Efficiently", Mehran University Research Journal of Engineering and Technology, Volume 29, No. 1, pp. 129-136, Jamshoro, Pakistan, January, 2010.