Minimizing Assembly Errors by Selecting Optimum Assembly
Sequence in the Assembly of a Rigid Circular Structure
Keywords: Assembly Modeling, Regid Circular Structrue, Assembly Variations, Varation
Propagation, Assembly Optimization.
Mehran University Research Journal of Engineering & Technology
Volume 31 , Issue 4
Mujeebuddin Memon , Tanveer Hussain , Zeeshan Ali Memon ,
References
1. |
Webb, P., Jayaweera, N., Ye, C., and Johnson, C.,
"Robotic Assembly of Aero-Engine Components",
Aerospace Manufacturing and Automated Fastening
Conference & Exhibition, North Charleston, SC, USA,
2008. |
2. |
Jayaweera, N., Webb, P., and Johnson, C., "Measurement
Assisted Robotic Assembly of Fabricated Aero-Engine
Components", Assembly Automation, Volume 30,
No. 1, pp. 56-65, 2010. |
3. |
Mansoor, E.N., "Selective Assembly - Its Analysis and
Applications", International Journal of Production
Research, Volume 1, No. 1, pp. 13-24, 1961. |
4. |
Matsuura, S., and Shinozaki, N., "Optimal Process Design
in Selective Assembly when Components with Smaller
Variance are Manufactured at Three Shifted Means",
International Journal of Production Research,
Volume 49, No. 3, pp. 869-882, 2011. |
5. |
Hussain, T., Yang, Z., Popov, A.A., and McWilliam, S.,
"Straight-Build Assembly Optimization: A Method to
Minimize Stage-by-Stage Eccentricity Error in the
Assembly of Axisymmetric Rigid Components (Two-
Dimensional Case Study)", ASME Journal of
Manufacturing Science and Engineering, Volume 133,
No. 3, pp. 031014, 2011. |
6. |
Mantripragada, R., and Whitney, D.E., "Modeling and
Controlling Variation Propagation in Mechanical
Assemblies using State Transition Model", IEEE
Transactions on Robotics and Automation, Volume 15,
No. 1, pp. 124-140, 1999. |
7. |
Yang, Z., Hussain, T., Popov, A.A., and McWilliam, S.,
"Novel Optimization Technique for Variation
Propagation Control in an Aero-Engine Assembly",
Proceedings of the Institution of Mechanical Engineers,
Part-B, Journal of Engineering Manufacture,
Volume 225, No. 1, pp. 100-111, 2011. |
8. |
Dabling, J.G., "Incorporating Geometric Feature Variation
with Kinematic Tolerance Analysis of 3D Assemblies",
M.Sc. Thesis, Brigham Young University, Provo, Utah,
USA, 2001. |
9. |
Yang, Z., Hussain, T., Popov, A.A., and McWilliam, S.,
"A Comparison of Different Optimization Techniques
for Variation Propagation Control in Mechanical
Assembly", IOP Conference Series: Materials Science
and Engineering, Volume 26, No. 1, pp. 1-11, 2011. |
10. |
Roy, U., and Li, B., "Representation and Interpretation
of Geometric Tolerances for Polyhedral Objects-I Form
Tolerances", Computer-Aided Design, Volume 30,
No. 2, pp. 151-161, 1998. |
11. |
BSI, DD CEN ISO/TS 17450-1, "Geometric Product
Specifications (GPS)-General Concepts; Part-1: Model
for Geometrical Specification and Varification", Brussels,
2007. |
12. |
Mantripragada, R., Cunningham, T.W., and Whitney,
D.E., "Assembly Oriented Design: A New Approach to
Designing Assemblies", Proceedings of the Fifth IFIP
TC5/WG5.2 International Workshop on Geometric
Modeling in Computer-Aided Design, pp. 308-324, USA,
1997. |
13. |
Paul, R.P., "Robot Manipulators: Mathematics,
Programming, and Control", The MIT Press, USA, 1981. |
14. |
Behara, R.S., Fontenot, G.F., and Gresham, A., "Customer
Satisfaction Measurement and Analysis using Six Sigma",
International Journal of Quality & Reliability
Management, Volume 3, pp. 9-18, 1995. |
15. |
Nigam, S.D., and Turner, J.U., "Review of Statistical
Approaches to Tolerance Analysis", Computer-Aided
Design, Volume 27, No. 1, pp. 6-15, 1995. |
|
|
|