Influence of the Scrap Tyre Processing Techniques on the
Physical Properties of the Crumb Rubber
Keywords: Crumb Rubber, Crumb Rubber Modified Bitumen, Ambient Crumb Rubber, Aquablast
Crumb Rubber.
Mehran University Research Journal of Engineering & Technology
Volume 31 , Issue 4
Naeem Aziz Memon , Kamran Ansari , Zaheer Ahmed Almani ,
References
1. |
Airey, G.D., Singleton, T.M., and Collop, A.C.,
“Properties of Polymer Modified Bitumen After Rubber-
Bitumen Interaction”, Journal of Materials in Civil
Engineering, Volume 4, pp. 344-54, 2002. |
2. |
Brule, B., Brion, Y., and Tanguy, A., “Paving Asphalt
Polymer: Relationship Between Coomposition, Sturcture
and Properties”, Proceeding of Asphalt Paving
Technologies, pp. 41-64, 1998. |
3. |
Isacsson, U., and Lu, X., “Testing and Appraisal of
Polymer-Modified Road Bitumens State-of-the-Art”,
Materials and Structures, Volume 177, pp. 139-59, 1995. |
4. |
Neto, S.A.D., et al., “Behavior of Asphalt-Rubber Hot
Mixes Obtained with High Crumb Rubber Content”,
Proceesding of Asphalt Rubber Conference, Brasilia,
Brazil, 2003. |
5. |
Way, G.B., “Flagstaff 1-40 Asphalt Rubber Overlay
Project - Nine Years of Success”, TRB Distinguished
Lecture, Part-1, Asphalt Mixtures, Part-2, Volume 1723,
pp. 45-52, 2000. |
6. |
FWHA, “Life-Cycle Cost Analysis in Pavement Design
in Search of Better Investment Decisions”, Pavement
Division Interim Technical Bulletin, FHWA-SA-98-079,
1998. |
7. |
CWC , “Best Practices in Scrap Tyres & Rubber
Recycling: Ambient Versus Cryogenic Grinding”, Best
Practice Document Clean Washington Centre (Ed.),
BP-T2-03-04, Washington DC, 1998. |
8. |
Shen, J.N., Amirkhanian, S.N., and Lee, S.J., “HP-GPC
Characterization of Rejuvenated Aged CRM Binders”,
Journal of Materials in Civil Engineering, Volume. 6,
pp. 515-22, 2007. |
9. |
Shulman, V.L., “Tyre Recycling After 2000: Status and
Options”, European Tyre Recycling Association, Paris,
France, 2000. |
10. |
Sukontasukkul, P., “Use of Crumb Rubber to Improve
Thermal and Sound Properties of Pre-Cast Concrete
Panel”, Construction and Building Materials,
Volume 23, No. 2, pp. 1084-92, 2009 |
|
|
|