Characterization of Low Twist Yarn: Part-I Effect of Blend
Ratio (Polyester/Cotton)
Keywords: Ring Spinning, Low Twist Yarn, Cotton, Polyester, Strength and Hairiness.
Mehran University Research Journal of Engineering & Technology
Volume 31 , Issue 4
Mazhar Hussain Peerzada , Anwaruddin Tanwari , Sadaf Aftab Abbasi ,
References
1. |
Nawaz, S.M., Shahbaz, B., and Yousaf, C.K., "Effect of
Different Blends With Various Twist Factors on the
Quality of PLC Blended Yarn", Pakistan Textile Journal,
Volume 48, No. 6, pp. 26-29, 1999. |
2. |
Li, Y., and Yan, H., "Measuring Unevenness and Blend
Ratios of Yarns with Microwave Resonators", Textile
Research Journal, Volume 60, No. 1, pp. 54-55, 1990. |
3. |
Anandjiwal, R., and Goswami, "Structural Property
Relationship of Blending Cotton Yams Made from Low
and High Tenacity Fibres", Textile Research Journal,
Volume 69, No. 2, pp. 130-137, 1999. |
4. |
El-Mogahzy, Y.E., "Setting Practical Scientific Criteria
for Cotton Fiber Selection and Blending, in Beltwide
Cotton Conferences", National Cotton Council,
Memphis, pp. 691-694, USA, 1998. |
5. |
Ford, J.E., "Segregation of Component Fibres in Blended
Yarns", Journal of Textile Institute, Volume 49,
pp. 608-620, 1958. |
6. |
Ghosh, S., Rodgers, J.E., and Ortega, A.E., "Rotor Ring
Measurement of Fiber Cohesion and Bulk Properties of
Staple Fibers", Textile Research Journal, Volume 62,
pp. 608-613, 1992. |
7. |
Hamilton, J.B., "The Radial Distribution of Fibres in
Blended Yarns, Part-I: Characterization by a Migration
Index", Journal of Textile Institute, Volume 49,
pp. 411-423, 1958. |
8. |
Hua, V.M., "Fiber Migration in Spinning", Journal of
China Textile University, Volume 8, pp. 1-6, 1991. |
9. |
Lang-Michaut, C., "Pratique des Tests Statistiques:
Interprétation des Mesures," Dunod, pp. 109, Paris,
France, 1990. |
10. |
Mortan, W.E., "The Arrangement of Fibers in Single
Yarns", Textile Research Journal, Volume 26,
pp. 325-331, 1956. |
11. |
Scardino, F.L., and Lyons, W.J., "Fiber Surface Properties
in Relation to Linear Assemblies During Processing, Part-
I: General Considerations; Results on the Worsted
System", Textile Research Journal, Volume 37,
pp. 874-880, 1967. |
12. |
Scardino, F.L., and Lyons, W.J., "Influence of Fiber
Geometry on the Mechanical Properties of Assemblies
During Processing, Part-I: Polyester Fibers in Webs and
Slivers", Textile Research Journal, Volume 40,
pp. 559-570, 1970. |
13. |
Townend, P.P., and Dewhirst, J., "Fibre Migration of
Viscose Rayon Staple-Fibre Yarns Processed on the
Bradford Worsted System", Journal of Textile Institute,
Volume 55, No. 10, pp. 485-502, 1964. |
14. |
Palaniswamy, K., and Mohamed, P., "Yarn Twisting",
AUTOTEX Research Journal, Volume 5, No. 2, June,
2005. |
15. |
ASTM Committee, "Standard Test Method for
Unevenness of Textile Strands Using Capacitance Testing
Equipment", ASTM Designation: D1425-96, ASTM
Standard on Textile Materials, American Society for
Testing and Materials, Philadelphia, USA, 2004. |
16. |
ASTM Committee, "Standard Test Method for Breaking
Strength of Yarn in Skein Form", ASTM Designation:
D1578-93, ASTM Standard on Textile Materials,
American Society for Testing and Materials,
Philadelphia, USA, 2004. |
17. |
ASTM Committee, "Standard Test Method for Tensile
Properties of Yarns by the Single-Strand Method", ASTM
Designation: D2256-02, ASTM Standard on Textile
Materials, American Society for Testing and Materials,
Philadelphia, USA. 2004. |
18. |
ASTM Committee, "Standard Guide for Measuring
Hairiness of Yarns by the Photo-Electric Apparatus",
ASTM Designation: D5647-95, ASTM Standard on
Textile Materials, American Society for Testing and
Materials, Philadelphia, USA, 2004. |
|
|
|