Prediction of Elastic-Plastic Behaviour of Structures at
Notches
Keywords: Power Hardening, Creep, Notched Structures, Elastic-Plastic, Notch Stress and Strain.
Mehran University Research Journal of Engineering & Technology
Volume 31 , Issue 3
Tanweer Hussain , Mujeebuddin Memon , Zeeshan Ali Memon ,
References
1. |
Zhu, H., Xu, J., and Feng, M., "Singular Fields Near a
Sharp V-Notch for Power Law Creep Material",
International Journal of Fracture, Volume 168, No. 2,
pp. 159-166, 2011. |
2. |
Tanner, D.W.J., Sun, W., and Hyde, T.H., "FE Analysis
of a Notched Bar Under Thermomechanical Fatigue
Using a Unified Viscoplasticity Model", Procedia
Engineering, Volume 10, pp. 1081-1086, 2011. |
3. |
Neuber, H., "Theory of Stress Concentration for Shear-
Strained Prismatical Bodies with Arbitrary Non-Linear
Stress-Strain Law", ASME, Journal of Applied Mechanics,
Volume 27, pp. 544-551, 1961. |
4. |
Segger, T., and Paul, H., "Generalised Application of
Neuber's Rule", Journal of Testing and Evaluation,
Volume 8, pp. 199-204, July 1980 |
5. |
Hoffman, M., and Segger, T., "A Generalised Method for
Estimating Elastic-Plastic Notch Stresses and Strains",
Part-1: Theory, Journal of Engineering Materials and
Technology, Volume 107, pp. 250-254, 1995. |
6. |
Hoffman, M., and Segger, T., "A Generalised Method for
Estimating Elastic-Plastic Notch Stresses and Strains",
Part-2: Application and General Discussion, Journal of
Engineering Materials and Technology, Volume 107,
pp. 255-260, 1995. |
7. |
Topper, T.H., Wetzel, R.M., and JoDean, M., "Neuber's
Rule Applied to Fatigue of Notched Specimens", Journal
of Materials, Volume 4, No. 1, pp. 200-209,
March, 1969. |
8. |
Yung-Li, L., Yung, J., and Hang-Hong, W., "A Constitutive
Model for Estimating Multiaxial Notch Strains", Journal
of Engineering Materials and Technology, Volume 117,
No. 1, pp. 33-40, January, 1995. |
9. |
Glinka, G., "Calculation of Inelastic Notch-Tip Strain-
Stress Histories Under Cyclic Loading", Journal of
Engineering Fracture Mechanics, Volume 22,
pp. 839-854, 1985. |
10. |
Sharpe, W.N.Jr., Yang, C.H., and Tregoing, R.L., "An
Evaluation of the Neuber and Glinka Relations for
Monotonic Loading", ASME, Journal of Applied
Mechanics, Volume 59, pp. 50-56, 1992. |
11. |
Stress and Strain Calculation at a Notch Root", Journal
of Materials Science and Engineering, Volume 50,
pp. 93-100, 1981. |
12. |
Sharpe, W.N.Jr., "Elastoplastic Stress and Strain
Concentrations", Journal of Engineering Materials and
Technology, Volume 117, pp. 1-7, 1995. |
13. |
Hyde, T.H., Sabesan, R., and Leen, S.B., "Approximate
Prediction Methods for Multiaxial Notch Stresses and
Strains Under Elastic-Plastic and Creep Conditions", The
Journal of Strain Analysis for Engineering Design,
Volume 40, pp. 535-548, 2005. |
14. |
Steven, M., and Nelson, V., "Advances in Multiaxial
Fatigue Life Prediction for Life Prediction for
Components with Stress Concentrations", International
Journal of Fatigue, Volume 19, pp. 503-515, 1997. |
15. |
Dowling, N.E., Brose., W.R., and Wilson, W.K., "Notched
Member Fatigue Life Predictions by the Local Strain
Approach in Fatigue Under Complex Loading”, Wetzel,
R.M. (Editor), Advances in Engineering, Society of
Automotive Engineers, Volume 6, pp. 55-84, Warrendale,
PA, 1997. |
16. |
Walker, W.K., "Multiaxial Stress-Strain Approximation
for Notch Fatigue", Journal of Testing and Evaluation,
Volume 5, pp. 106-113, 1977. |
17. |
Greatest Stress In a structure Subject to Creep",
Proceedings of I. Mechanical E., Volume 178,
pp. 198-206, 1963-1964 |
18. |
Peravali, S., Hyde, T.H., Cliffe, K.A., and Leen, S.B.,
"An Anisotropic Creep Damage Model for Anisotropic
Weld Metal", Journal of Pressure Vessel Technology,
Volume 131, No. 2, pp. 21401-21408, 2009. |
19. |
Hyde, T.H., Sabesan, R., and Leen, S.B., "Approximate
Prediction Methods for Multiaxial Notch Stresses and
Strains Under Elastic-Plastic and Creep Conditions",
Journal of Strain Analysis for Engineering Design,
Volume 40, No. 6, pp. 535-548, 2005. |
20. |
Penny, R.K., and Marriott, D.L., "Design for Creep",
Second Edition, Chapman & Hall, London, 1995. |
21. |
ABAQUS User's and Theory Manuals, Version 6.3, HKS
Inc., Pawtucket, RI, US, 2002. |
|
|
|