Experimental Verification of Current Shear Design Equations
for HSRC Beams
Keywords: High Strength, Building Codes, Transverse Reinforcement, Shear Span, Beams.
Mehran University Research Journal of Engineering & Technology
Volume 31 , Issue 3
Attaullah Shah , Saeed Ahmad ,
References
| 1. |
Russo, G., Somma, G., and Angeli, P., "Design Shear
Strength Formula for High Strength Concrete Beams",
Material and Structures-RILEM, Volume 37,
pp. 680-688, 2004. |
| 2. |
ASCE-ACI Committee 445, "Recent Approaches to
Shear Design of Structural Concrete", Journal of Structural
Engineering, Volume 124, No. 12, pp. 1375-1417,
December, 1998. |
| 3. |
ACI Committee 318, “Building Code Requirements for
Reinforced Concrete and Commentary”, ACI318RM-
06,ACI, Detroit, 2006. |
| 4. |
CSA A-233-94, Canadian Standards for Design of
Concrete Structures, pp. 199, Rexdale Ontario Canada,
December, 1994. |
| 5. |
AASHTO LRFD, “Bridge Design Specifications”, 2nd
Edition, American Association for State Highway and
Transportation Officials, Washington, DC, 1998. |
| 6. |
Euro Code-2, “Design of Concrete Structures Part-1:
General Rules and Rules for Buildings”, Commission of
the European Communities, ENV 1992-1-1, pp. 253,
December, 1991. |
| 7. |
Japan Society of Civil Engineers, “Specification for
Design and Construction of Concrete Structures”, Design,
JSCE Standard, Part-1, Japan Society of Civil Engineers,
Tokyo, 1986. |
| 8. |
Collins, M.P., and Mitchell, D., "Shear Design of Pre-
Stressed and Non Pre-Stressed Concrete Beams", Journal
of Pre-Stressed Concrete Institute, Volume 25, No. 5,
pp. 32-100, 1980. |
| 9. |
Bazant, Z.P., and Kim, J.K., "The Size Effect in Shear
Failure of Longitudinally Reinforced Beams", ACI
Structural Journal, Volume 81, No. 5, pp. 456-468, 1984. |
| 10. |
NCHRP (National Cooperative Highway Research
Program), Transport Research Board Washington DCUSA,
2005. |
| 11. |
Duthlin, D., and Carino, N.J., "Shear Design of High
Strength Concrete Beams: A Review of State of the Art",
Building and Fire Research Laboratory, NIST MD-USA,
August, 1999. |
| 12. |
Mohiuddin, A.K., Edwin, R., and Shah, S., "Shear Design
of High Strength Concrete Beams", Structural Journal,
ASCE, 2000. |
| 13. |
Cladera, A., and Mari, A.R., "Shear Design Procedure for
Reinforced Normal and High Strength Concrete Beams
Using Artificial Neural Network-Part II Beams with
Stirrups", Engineering Structures, Volume 26,
pp. 927-936, Elsevier, 2004. |
| 14. |
Shehata, I., Shehata, L., and Garcia, S., "Minimum Steel
Ratios in Reinforced Concrete Beams Made of Concrete
with Different Strengths-Theoretical Approach",
Materials and Structures-RILEM, Volume 36, pp. 3-11,
2003. |
| 15. |
Cladera, A., and Mari, A.R., "Experimental Study on
High Strength Concrete Beams Failing in Shear",
Engineering Structures, Volume 27, pp. 1519-1527,
Elsevier, 2005. |
| |
|
|