Article Information  
Manufacturing of Aluminum Composite Material Using Stir Casting Process


Mehran University Research Journal of Engineering & Technology

Volume 30 ,  Issue 1

Muhammad  Hayat  Jokhio , Muhammad  Ibrahim Panhwar , Mukhtiar  Ali  Unar ,

1. Shivatsan, T.S, Ibrahim, I.A, Mehmed, F.A., and Lavernia, E.J., "Processing Techniques for Particulate Reinforced Metal Matrix Composites", Journal of Materials Science, Volume 26, pp. 5965-5978, 1991.
2. Warren, H., and Hunft ,Jr., "Automotive Applications of Metal Matrix Composites", Aluminum Consultants Group, Inc Danied B. Miracle, Air Force Research Laboratory Report, pp. 1029-1032, 2004.
3. Ejiofor, J., and Reddy, R.G., "Developments, Processing and Properties of Particulate AL-Si Composites", Journal of Materials, pp. 31-37, November, 1997.
4. Taha, A.M., "Industrialization of Cast Aluminum Materials Composites", Jounral of Materials and Manufacturing Processes, pp. 618-641, September, 2001. http/ www.inform World.Com
5. Hashim, T., Loony, L., and Hashmi, M.S.J., "Particle Distribution in Cast Metal Matrix Composite", Jounral of Materials Processing Technology, Part-1, Volume 123, pp. 251-257, 2003.
6. Das, S., "Development of Aluminum Alloy Composite for Engineering Applications", Indian Institute of Meterials, Volume 27, No. 4, pp. 325-334, August, 2004.
7. Kook, M., "Production and Mechanical Properties of "Al2O3", Particles Reinforced 2024, Al Alloy Composites", Jounral for Materials Processing Technology, Volume 161, pp. 385-387, 2003.
8. Surappa, M.K., Rohatgi, P.K., "Preparation and Properties of Cast Aluminum-Ceramics Particle Composites", Jounral of Materials Science, Volume 16, pp. 983-993, 1981.
9. Gupta, and Surappa, "Processing Microstructure Properties of Al Based Metal Matrix Composites", Journal of Key to Engineering Materials, Volume 104-107, pp. 259-274.
10. Zhou, W., and. Xu, Z.M., "Casting of SiCp Reinforced Metal Matrix Composites", Jounral of Materials and Processing Technology, Volume 63, pp. 358-363, 1997.
11. Maxim, L., Seleznew, I., James, S., A, .Cornie, All, S.Argon and Ralph, P, Mason, "Effect of Composition Particle Size and Heat Treatment on Mechanical Properties of Al-4.5 % Cu, Based, Alumina Particulates Reinforced Composites", SAE International Congress DETOIT, M I February, 23-26 1998.
12. Hashim, J., Loony, L., and Hashmi, M.S.J., "Metal Matrix Composites Production by Stir Casting Method", Journal of Materials Processing Technology, Volume 92-93, pp, 1-7, 1999.
13. Darell, R., Herling, G., Glenn J, and Wrrent, H.Jr., "Low Cost Metal Matrix composites" Journal of Advanced Materials and Process, pp. 37-40, July, 2001.
14. Yilmaz, and Buytoz, "Abrasive Wear of Al2O3 Reinforced Aluminum Based MMCs", Jounral of Composites Science and Technology, Volume 61, pp. 2381-2392, 2001.
15. Rupa, D.G., and Meenia, H., "SiC Particulate Distribution Dispersed Composites of An AL-Zn-Mg-Cu Alloy Property Comparison with Parent Alloy", Jounral of Materials Characterizations, Volume 54, pp. 438-445, 2005.
16. Balasivanandha, S., "Influence of Stirring Speed and Stirring Time on Distribution of Particles in Cast Metal Matrix Composites", Jounral of Material Processing Technology, Volume 171, pp. 268-273, 2006.
17. Pradeep, R., "Cast Aluminum Metal Matrix Composites for Automotive Applications", Journal of Materials, pp. 10-10, April, 1993.
18. Pai, B.C., Pllia, R.M., and Satyanaryanak, G., "Stir Cast Aluminum Alloy Matrix", Key Engineering Materials, Volume 79-80, pp. 117 128, 1993.
19. Stefanos S., "Mechanical Behaviour of Cast SiC Reinforced with Al 4.5% Cu-1.5% Mg Alloy", Journal of Materials Science and Engineering, Volume 210, pp. 76-82, 1996.
20. Mohammad, B., Ndaliman, and Akpan, P.P., "Behavior of Aluminum Alloy Castings Under Different Pouring Temperature and Speeds", Journal of Particles Technology, Volume 16, pp. 1-9, 2008 Http/ lejpt.academic A 11/071-080.htm1.
21. Azim, A.A.N., Shash, Y., Mostafa, S.F.,, and Younan, A., "Casting of 2024 Al Alloy Reinforced with "Al2O3" Particles", Journal of Materials Processing Technology, Volume 55, pp 199-205, 1995.
22. Redsten, A.M., Klier, E.M., Brown, A.M., Dunand, D.C., "Mechanical Properties and Microstructure of Cast Oxide-Dispersion- Strengthened Aluminum", Journal of Materials Science and Engineering, Volume A 201, pp. 88-102, 1995.
23. Daud, A., Abou, E.K., and Abdul, A.A.N., "Effect of "Al2O3" Particles Micro Structure and Sliding Wear of 7075 Al-Alloy Manufactured by Squeeze Casting Method", Journal of Materials Engineering and Performance, Volume 13, pp. 135-143, 2004.
24. Venkatararaman, and Sundararajan, "Correlation Between the Characteristics of the Mechanically Mixed Layer and Wear Behavior of Aluminum AL-7075 Alloy and AL7075 Alloy and AL -MMCs", Jounral of Wear, Volume 245, pp. 22-28, 2004.
25. Elmas, S., "Aging Behavior of Spray Cast AL-Zn-Mg-Cu Alloys", Turkish Jounral of Engineering & Environmental Science, Volume 25, pp. 68-1-686, 2001.
26. Shabestari, and Moemeni, "Effect of Copper and Solidification Conditions on the Microstructure and Mechanical Properties of Al-Si-Mg Alloys", Journal of Materials Processing Technology, Volume 153-154, pp. 193-198, 2004
27. Hieu and Nguyen, "The Effects of Solidification Rates on Porosity Formation and Cast Microstructure of Aluminum Alloy A356 Laboratory Module 3", EGR250 Materals Science & Engineering, February, 2005.
28. Jokhio, M.H., Panhawar, M.I., and Unar, M.A., "Modeling Mechanical Properties of Cast Aluminum Alloys", Mehran University Research Journal of Engineering & Technology, Volume 28, No. 3, Jamshoro, Pakistan, July, 2009.
29. Jokhio, M.H., "Modeling of High Strength and Wear Resistance Aluminum Alloy Based Casting Composite Material", Ph.D. Thesis, Mehran University of Engineering & Technology Jamshoro, Sindh, Pakistan, March, 2010.