Work Index and Grinding Energy Assessment of Dilband Iron
Ore, Pakistan
Keywords: Work index, Grinding Energy, Rod Mill, Ball Mill, Dilband Iron Ore.
Mehran University Research Journal of Engineering & Technology
Volume 30 , Issue 1
Muhammad Ishaque Abro , Abdul Ghani Pathan , Abdul Hakeem Mallah ,
References
1. |
Aksani, B., and Sönmez, B., "Simulation of Bond
Grindability Test by Using Cumulative Based Kinetic
Model", Minerals Engineering, Volume 13, No. 6,
pp. 673, 2000. |
2. |
Aksit, M.Ö., "Reducibility Properties of Erdemir
Samples", Metallurgical and Materials Engineering,
Volume 107, Middle East Technical University, 2004. |
3. |
Deniz, V., "Breakage Properties of Porous Materials by
Ball Milling", 19th International Mining Congress and
Fair of Turkey, pp. 207-211, Izmir, Turkey, 2005. |
4. |
Deniz, V., and Ozdag, H., "A New Approach to Bond
Grindability and Work Index: Dynamic Elastic
Parameters", Minerals Engineering, Volume 16, No. 3,
pp. 211-217, 2003. |
5. |
Kelly, E.G., and Spottiswood, D.J., "Introduction to
Mineral Processing", Australian Mineral Foundation,
Printed in Australia by Crescent Print, 1995. |
6. |
Khan, M.M., "Selective Flocculation of Lead Zinc
Concentrate", Ph.D. Thesis, University of Nottingham,
1985. |
7. |
Kolacz, J., and Sandvik, K.L., "Ultrafine Grinding in an
Air-Swept Ball Mill Circuit", International Journal of
Mineral Processing, Volume 361, pp. 44-45, 1996. |
8. |
Ozkahraman, H.T., "A Meaningful Expression Between
Bond Work Index, Grindability Index and Friability
Value", Minerals Engineering, Volume 18, No. 10,
pp. 1057-1059, 2005. |
9. |
Partyka, T., and Yan, D., "Fine Grinding in a Horizontal
Ball Mill", Minerals Engineering, Volume 20, No. 4,
pp. 320-326, 2007. |
10. |
Petruk, W., "Mineralogical Charagteristics of an Oolitic
Iron Deposit in the Peace River District, Alberta",
Canodian Mineralogist, Volume 15, pp. 3-13, 1977. |
11. |
Umucu, V.D.N.S.Y., "The Effect of Circulating Load
and Test Sieve Size on The Bond Work Index Based on
Natural Amorphous Silica", 18th International Mining
Congress and Exhibition of Turkey, [ISBN 975-395-
605-3], 2003. |
12. |
Deniz, V., Akkurt, Y., and Umucu, Y., "A New Model on
Breakage Behaviour of A Laboratory Impact Mil", 19th
International Mining Congress and Fair of Turkey, Izmir,
Turkey, pp. 229-232, 2005. |
13. |
Weissberger, S., and Zimmels, Y., "Studies on
Concentration and Direct Reduction of the Ramim Iron
Ore", International Journal of Mineral Processing,
Volume 11, No. 2, pp. 115, 1983. |
14. |
Yekeler, M., and Ozkan, A., "Correlation of the
Breakage Parameters with the Critical Surface Tension
for Wetting of Barite", Powder Technology,
Volume 134, Nos. 1-2, pp. 108-116, 2003. |
15. |
Abro, M.I., "Up Gradation of Dilband Iron Ore", Ph.D.
Thesis, Mehran University of Engineering and
Technology Jamshoro, Pakistan, 2009. |
16. |
Manieh, A.A., "Oolite Liberation of Oolitic Iron Ore,
Wadi Fatima, Saudi Arabia", International Journal of
Mineral Processing, Volume 13, No. 3, pp. 187-192,
1984. |
17. |
Edward C., Dowling, Jr., and John, I.M., "Improving and
Optimizing Operations: Things That Actually Work",
Society for Mining, Metallurgy, and Exploration, Inc.
8307, Shaffer Parkway Littleton, CO 80127, 2004. http:/
www.smenet.org Online Book Plant Operators Forum
2004/plant Operators Forum 2004.pdf |
|
|
|