Mehran University Research Journal Of Engineering &
Technology (HEC Recognized In Category "X")
Publishing Since 1982.

For Authors
For Readers
Article Information  
Techniques for Thermal Damping in Tube Bundles

Keywords: Thermal Damping, Tube Bundles, Damping Mechanisms, Flow Induced Vibration, Heat Exchangers, Steam Generators, Multi-Span.

Mehran University Research Journal of Engineering & Technology

Volume 29 ,  Issue 4


1. Wootton, L.R., "Industrial Implications of Flow Induced Vibrations", Proceeding of Institution of Mechanical Engineers, C 416/111, International Conference, Bedford Hotel, Brighton, pp. 1-6, England, 20-22 May,1991.
2. Blevins, R. D., "Flow Induced Vibration", 3rd Ed., Van Nostrand Reinhold Ltd, New York, 1993.
3. Goyder, H.G.D., "Flow Induced Vibration in Heat Exchanger", Transactions of Institute of Chemical Engineers, Volume 80, part A, pp. 226-232, U.K., April, 2002.
4. Mitra, D.R., "Fluid-Elastic Instability in Tube Arrays Subjected to Air-Water and Steam-Water Cross-Flow", PhD Thesis: University of California, USA, 2005.
5. Yang, J.C.S., Mark, C.H, Jiang, J., Chen, D., Elahi, A., and Tsal, W.H., "Determination of Fluid Damping using Random Excitation", Journal of Energy Resource Technology, Trans. of the ASME, Volume 107, No. 2, pp. 220-225, 1985.
6. Wambsganss, M.W., Chen, S.S., and Jendrzejcyk, J.A., "Added Mass and Damping of a Vibrating Rod in Confined Viscous Field" Report No.ANL-CT-75-08, , Argonne National Laboratory, Illinois, USA, pp.1-25, 1974.
7. Pettigrew, M.J., Tromp, J.H., Taylor, C.E., and Kim, B.S., "Vibration of Tube Bundles in Two-Phase Cross-Flow: Part 2 -Fluid-Elastic Instability," Journal of Pressure Vessel Technology, Transactions of the ASME, Volume 111, pp. 478-487, 1989.
8. Pettigrew, M.J., Goyder, H.G.D., Qiao, Z.L., and Axisa, F., "Damping of Multi-Span Heat Exchanger Tubes, part I: In Gases", Proceedings of Pressure Vessel and Piping Conference, ASME, Volume 104, pp.81-87, 1986.
9. Erskine, J.B., and Waddington, W.,"A Review of Tube Vibration Failure in Shell & Tube Heat Exchanger and Failure Prediction Methods", International Symposium of Vibration Problem in Industry, pp. 1-20, UK, 1973.
10. Kimball, A. L., and Lovell, D. E., "Variation of Young's Modulus with Temperature from Vibration Measurements" Physical Review, Volume 26, Issue 1, pp. 121-124, 1925.
11. Goodfellow, Metals, Alloys, Compounds, Ceramics, Polymers & Composites. Catalogue-1993/94.
12. Lowery, R.L., and Moretti, P.M., "Natural Frequencies and Damping of Tubes on Multi-Span Supports", 15th National Heat Transfer Conference, American Institute of Chemical Engineers, Paper No.1,pp 1-20, San Francisco, USA, 1975.
13. Collard, B., Pisapia, S., Bellizzi, S., and Broc, D., "Flow Induced Damping of PWR Fuel Assembly", Flow Induced Vibration Conference-2004, Paris, pp. 1-6, France, 2004.
14. Hartlen, R. T., and Simpson, F. J., "Wind Tunnel Determination of Fluid-Elastic Vibration Threshold for Typical Heat Exchanger Tube Patterns", Ontario Hydro Research Division Report-26479 (new 4-74), pp1-31, Canada, 1974.
15. Chen, S.S., "Dynamic Tube/Support Interaction in Heat Exchanger Tubes", 5th International Conference on Flow Induced Vibration, Conf-910561-1, England, 1991.
16. Pettigrew, M.J., "Damping of Heat Exchanger Tubes", Proceeding of 9th Canadian Congress of Applied Mechanics, Saskatoon, pp. 125-126, Canada, 1983.
17. Goyder, H.G.D., "An Assessment Method for Unstable Vibration in Multi-Span Tube Bundles", Journal of Fluids and Structures, Volume 18, pp. 555-572, 2003.
18. Taylor, C. E., Pettigrew, M. J., Dickinson, T. J., Currie, I.G., and Vidalou, P., "Vibration Damping in Multi-Span Heat Exchanger Tubes", Journal of Pressure Vessel Technology, Transactions of the ASME, Volume 120, pp. 283-289, August,1998.
19. Carlucci, L.N., and Brown, J.D., "Experimental Studies of Damping and Hydrodynamic Mass of a Cylinder in Confined Two-Phase Flow", ASME Journal of Vibration, Acoustics, and Stress Reliability in Design, Volume 105, pp.83-89, 1983.
20. Nakamura, T., Fujita, K., and Tsuge, A., "Two Phase Cross-Flow Induced Vibration of Tube Arrays", JSME International Journal, Volume 36, No.3, pp. 429-438, 1993.
21. Khushnood, S., Malik, M.A., Khan, Z.M., Khan, A., Iqbal, Q., Khalil, M.S., Rashid, B., and Hussain, S.Z., "Modeling and Analysis of Thermal Damping in Heat Exchanger Tube Bundles", Proceedings of International Conference on Nuclear Engineering (ICONE14),pp. 1-14, Miami, Florida, USA, July 17-20, 2006.
22. Khushnood, S., "Vibration Analysis of a Multi-Span Tube in a Bundle", Ph.D Thesis, Department of Mechanical Engineering, National University of Sciences and Technology, Pakistan, 2005.
23. ASME Boiler and Pressure Vessel Code, Section II, Part D, Subsection 2, 2001.
24. Iqbal, Q., Khushnood, S., El-Ghalban, A.R., Khan, M.A., Qureshi, M.A., and Khalil, M.S., "Modeling of Thermal Damping in a Multi-Span Tube Bundle", International Conference on Nuclear Engineering (ICONE-15),pp. 1-7, Japan, April, 2007.
25. Iqbal, Q., Khushnood, S., El-Ghalban, A.R., Sheikh, N.A., Malik, M. A., and Arastu, A., "Damping in Heat Exchanger Tube Bundles: A Review" International Conference on Nuclear Engineering (ICONE-15), pp.1-10, Nagoya, Japan, April 2007.
26. El-Ghalban, A.R., Iqbal, Q., Khushnood, S., Qureshi, M.A., and Khalil, M.S., "Effect of Temperature on Damping in Shell and Tube Heat Exchanger" International Conference on Nuclear Engineering (ICONE-16), pp. 1-6, Florida, USA, 2008.
27. Sheikh, N.A., Iqbal, Q., Khushnood, S., and El-Ghalban, A.R., "Fluid Structure Interaction of Flow Induced Vibration: A Study of Laminar and Turbulent Flow Fields", Journal of Power and Energy Systems, Volume 2, No. 2, pp.1-9 , Japan, 2008.
28. Liu, C.S., "Identifying Time-Dependent Damping and Stiffness Functions by a Simple and Yet Accurate Method", Journal of Sound and Vibration, Volume 318, pp. 148-165, 2008.