Optimization of Surface Finish in Turning Operation by
Considering the Machine Tool Vibration using Taguchi Method
Keywords: Taguchi Method, Surface Roughness, Vibration Amplitude, ANOVA, Optimization.
Mehran University Research Journal of Engineering & Technology
Volume 31 , Issue 1
Muhammad Munawar , Nadeem A. Mufti , Hassan Iqbal ,
References
| 1. |
Taguchi Method, Surface Roughness, Vibration Amplitude, ANOVA, Optimization. |
| 2. |
Kirby, D.E., and Joseph, C.C., "Development of a Fuzzy-
Nets-Based Surface Roughness Prediction System in
Turning Operations”, Journal of Computers & Industrial
Engineering, Volume 53, pp. 30-42, UK, 2007. |
| 3. |
Kirby, D.E., "A Parameter Design Study in a Turning
Operation Using the Taguchi Method", The Technology
Interface Journal/Fall, Volume 7, No. 1, USA, 2006. |
| 4. |
Lin, C.S., and Chang, F.M., "A Study on the Effects of
Vibrations on the Surface Finish Using a Surface
Topography Simulation Model for Turning",
International Journal of Machine Tools & Manufacture,
Volume 38, No. 7, pp. 763-78, Taiwan, 1998. |
| 5. |
Chang, F.X., "An Experimental Study of the Impact of
Turning Parameters on Surface Roughness", Proceedings
of the Industrial Engineering Research Conference, Paper
No. 2036, GA, 2001. |
| 6. |
Thomas, M., Beauchamp, Y., Youssef, Y.A., and
Masounave, J., “Effect of Tool Vibrations on Surface
Roughness During Lathe Dry Turning Process”, Journal
of Computers Industrial Engineering, Volume 31,
No. 3/4, pp. 637-644, UK, 1996. |
| 7. |
Lasota, A., and Rusek, P., "Influence of Random
Vibrations on the Roughness of Turned Surfaces",
International Journal of Mechanical Working
Technology, Volume 7, No. 3, pp. 277-284, Poland,
1983. |
| 8. |
Choudhry, K.S., Goudimenk, N.N., and Kudinov, A.V.,
"On-Line Control of Machine Tool Vibration in
Turning", International Journal of Machine Tools &
Manufacture, Volume 37, No. 6, pp. 801-811, UK, 1997. |
| 9. |
Wang, X., and Chang, F.X., "Development of Empirical
Models for Surface Roughness Prediction in Finish
Turning", Journal of Advanced Manufacturing
Technology, Volume 20, No. 5, USA, 2002. |
| 10. |
Davim, P.J., "Design of Optimization of Cutting
Parameters for Turning Metal Matrix Composites Based
on the Orthogonal Arrays", International Journal of
Material Processing Technology, Volume 132,
pp. 340-344, Portugal, 2003. |
| 11. |
Yang, H.W., and Tarng, S.Y., "Design Optimization of
Cutting Parameters for Turning Operations Based on
the Taguchi Method", Journal of Materials Processing
Technology, Volume 84, pp. 122-129, Taiwan, 1998. |
| 12. |
Tzeng, F.Y., "Parameter Design Optimization of
Computerized Numerical Control Turning Tool Steel
for Turning Tool Steels for High Dimensional Precision
and Accuracy", Journal of Materials and Design,
Volume 27, pp. 665-675, Taiwan, 2006. |
| 13. |
Davim, P.J., "A Note on the Determination of Optimal
Cutting Conditions for Surface Finish Obtained in Turning
Using Design of Experiments", Journal of Materials
Processing Technology, Volume 116, pp. 305-308,
Portugal, 2001. |
| 14. |
Berry, E.J., "Vibration Analysis-II", Volume 1,
Chapter-2, pp. 11, Technical Associate of Charlotte
P.C., Entek IRD International, USA, 1994. |
| 15. |
Shiou, J.F., and Hsu, C.C., "Surface Finishing of Hardened
and Tempered Stainless Tool Steel Using Sequential Ball
Grinding, Ball Burnishing and Ball Polishing Processes
on a Machining Centre", Journal of Materials Processing
Technology, Volume 205, pp. 249-258, Taiwan, 2008. |
| 16. |
Bendell, A., Disney, A., and Pridmore, A.W., "Taguchi
Methods: Applications in World Industry",
IFS Publications, London, UK, 1989. |
| 17. |
Nalbant, M., Gokkaya, H., and Sur, G., "Application of
Taguchi Method in the Optimization of Cutting
Parameters for Surface Roughness in Turning", Journal
of Materials and Design, Volume 28, pp. 1379-1385,
Ankara, Turkey, 2007. |
| 18. |
Lipski, J., Litak, G., and Rusinek, R., "Surface Quality of
a Work Material's Influence on the Vibrations of the
Cutting Process", Journal of Sound and Vibration,
Volume 252, No. 4, pp. 729-737, Poland, 2002. |
| 19. |
Mikell, P.G., "Fundamentals of Modern Manufacturing,
Materials, Processes, and Systems", Third Edition,
Chapter-24, pp. 578, John Wiley & Son Inc., USA,
2007. |
| 20. |
GoKkaya, H., and Nalbant, M., "The Effects of Cutting
Tool Coating on the Surface Roughness of AISI 1015
Steel Depending on Cutting Parameters", Turkish Journal
of Engineering & Environmental Sciences, Volume 30,
pp. 307-316, Turkey, 2006. |
| 21. |
Amitava, M., "Fundamentals of Quality Control and
Improvement", Second Edition, Chapter-12,
pp. 606-609, Pearson Prentice Hall, India, 2002. |
| 22. |
Thamizhmanii, S., Saparudin, S., and Hasan, S., "Analyses
of Surface Roughness by Turning Process Using Taguchi
Method", Journal of Achievements in Materials and
Manufacturing Engineering, Volume 20, Nos. 1-2,
Malaysia, 2007. |
| |
|
|