Evaluation of Impact Strength of Epoxy Based Hybrid
Composites Reinforced with E-Glass/Kevlar 49
Keywords: Hybrid Composites, Bear Resistance, Break Resistance Glass/Kevlar Fiber Reinforced
Composite, Vacuum Bagging Resin Transfer Molding, and Scanning Electron Microscopy
Mehran University Research Journal of Engineering & Technology
Volume 36 , Issue 4
SUBHAN ALI JOGI , MUHAMMAD MOAZAM BALOCH , ALI DAD CHANDIO , IFTIKHAR AHMED MEMON , GHULAM SARWAR CHANDIO ,
References
| 1. |
Zhu, D., Mobashar, B., and Rajan, S D.," Dynamic Tensile
Testing of Kevlar 49 Fabrics", Journal of Materials in
CivilEngineering, Volume, 23, pp. 1-10, 2011. |
| 2. |
Reis, P.N.B., Ferreira, J.A.M., Zhang, Z.Y., Benameur,
T., and Richardson, M.O.V., "Impact Response of Kevlar
Composites with Nanoclay Enhanced Epoxy Matrix",
Journal on Composites, Part-B, Volume 46, pp. 7-14,
2013. |
| 3. |
Reis, P.N.B., Ferreira, J.A.M.,Santos, P., Richardson,
M.O.W., and Santos, J.B., "Impact Response of Kevlar
Composites with Filled Epoxy Matrix", Journal on
Composite Structures, Volume 94, pp. 3520-3528, 2012 |
| 4. |
Alam, S., Habib, F., Irfan,M., Iqbal, W., and Khalid, K.,
"Effect of Orientation of Glass Fiber on Mechanical
Properties of GRP Composites", Journal of Chemistry
Society Pakistan, Volume 32, pp. 265-269, 2010. |
| 5. |
Wang, H.W., Zhou, H.W., Gui, L.L.,Ji, H.W., and Zhang,
X.C., "Analysis of Effect of Fiber Orientation on Young's
Modulus for Unidirectional Fiber Reinforced Composite",
InternationalJournal of Composites, Part-B,
Volume 56,pp.733-749,2014. |
| 6. |
Sohn, M.S., Hu, X.Z., Kim, J.K., and Walker, L., "Impact
Damage Characterization of Carbon Fiber/Epoxy
Composites with Multi-Layer Reinforcement”",
International Journal of Composite, Part-B, Volume 31,
pp. 681-691,2000 |
| 7. |
Babu, S.L., and Shivanand, "Impact Analysis Laminated
Composites on Glass Fiber and Carbon Fiber",
International Journal of Emerging Technology &
Advanced Engineering, Volume 4, pp. 824-829,2014 |
| 8. |
Rajesh, N., and Jerald, M.J., "Experimental Investigation
of Woven E-Glass Epoxy Composite Laminates
Subjected to Low-Velocity Impact at Different Energy
Levels", Journal of Minerals & Materials
Characterization of Engineering, Volume 9, No. 7,
pp. 643-652,2010. |
| 9. |
Valena, S.L., Griza, S., Gomes de Oliveira, V., Midori
Sussuchi, E., and Carvalho de Cunha, F.G., " Evaluation
of Mechanical behavior of Epoxy Composites Reinforced
with Kevlar Plain Fabric and Glass/Kevlar Hybrid Fabric",
Journal of Composites, Part-B, Volume 70, pp. 1-8,
2015. |
| 10. |
Satish, K.G., Siddeswarappa, B., and Mohamed K.K.,
"Characterization of In-Plane Mechanical Properties
of Laminated Hybrid Composites", Journal of Minerals
& Materials Characterization of Engineering, Volume 9,
No. 2, pp. 105-114, 2010. |
| |
|
|