Analysis of Wind Energy Potential and Optimum Wind Blade
Design for Jamshoro Wind Corridor
Keywords: Wind Blade, Blade Element Theory, Q-Blade, Wind Energy Potential
Mehran University Research Journal of Engineering & Technology
Volume 36 , Issue 4
SYED UMAID ALI , RAFIULLAH KHAN , SYED ATHAR MASOOD ,
References
1. |
State of Industry Report National Electric Power
Regulatory Authority, pp. 112, 2014. |
2. |
Medium Term Development Framework 2005-2010:
An Overview by Ministry of Planning, Government of
Pakistan, 2005. |
3. |
Chaudhry, Q.Z., "An Investigation of Wind Power
Potential of Gharo, Sindh, Pakistan", Pakistan Journal
of Metrological, Volume 6, No. 11, pp. 1-6, 2007. |
4. |
Prasad, N., Janakiram, S., Prabu, T., and Sivasubramaniam,
S., "Design and Development of Horizontal Small Wind
Turbine Blade for Low Wind Speeds", No, 1, pp.75-84,
2014. |
5. |
Li, H., and Chen, Z., "Design Optimization and Site
Matching of Direct-Drive Permanent Magnet Wind
Power Generator Systems", Renewable Energy,
Volume 34, No. 4, pp.1175-1184, 2009. |
6. |
Adaramola, M., "Wind Turbine Technology: Principles
and Design", CRC Press, 2014. |
7. |
Ackermann, T., "Wind Power in Power Systems", John
Wiley & Sons Ltd., Volume 140, Chichester, UK, 2005. |
8. |
Hau, E.,"Wind Turbines, Fundamentals, Technologies,
Application, Economics", 2nd Edition, Springer, Berlin,
Germany, 2006. |
9. |
Burton, T.,"Wind Energy Handbook", John Wiley &
Sons Ltd., Chichester, UK, 2011. |
10. |
McCosker, J., "Design and Optimization of a Small Wind
Turbine", Rensselaer Polytechnic Institute, 2012. |
11. |
Goett, H.J., and Kenneth, W.B., "Tests of NACA 0009,
0012, and 0018 Airfoils in the Full-Scale Tunnel", 1939. |
12. |
Mokhtar, A., and Setiawan, J.D., "The Aerodynamics
Design of Horizontal Axis Wind Turbine Blade Using
Computational Fluid Dynamic",http://www.academia.edu,
2012. |
13. |
Claessens, M.C., "The Design and Testing of Airfoils for
Application in Small Vertical Axis Wind Turbines", M.Sc.
Thesis, Faculty of Aerospace engineering, Delft
University of Technology, November 9, 2006. |
14. |
Timmer, W.A., "An Overview of NACA 6-Digit Airfoil
Series Characteristics with Reference to Airfoils for Large Wind Turbine Blades", American Institute of Aeronautics
and Astronautics, 2012. |
15. |
Abd Aziz, P.D., "A Simulation Study on Airfoils using
VAWT Design for Low Wind Speed Application", 4th
International Conference on Engineering Technology
and Technopreneuship, 2014. |
16. |
Raluca, D.I., Sorin, V., and Mircea, I., "Rotor Design for
Vertical Axis Wind Turbines, Suitable for Urbanseashore
Environment or Naval Industry Implementation",
International Conference on ISTM , Volume 9, 2014. |
17. |
Ionescu, R.D., Ioan, S., and Mircea, I., "Forces and Torque Analysis of an Urban Small Power Vertical Axis Wind
Turbine (Numerical Results)", Acta Technica
Napocensis-Series: Applied Mathematics, Mechanics, and
Engineering, Volume 57, No. 3, 2014. |
18. |
Naishadh, G.V., and Sathya, NG.,"Aero-Structural Design
Optimization of Composite Wind Turbine Blade", Ph.D.
Thesis, Embry-Riddle Aeronautical University, 2013. |
19. |
Aryal, B.U.,"Design and Analysis of a Small Scale Wind Turbine Rotor at Arbitrary Conditions", Rentech
Symposium Compendium, Volume 4, September, 2014. |
20. |
Alosh, J., and Saijal, K.K., "Multi-Objective Design
Optimization of Wind Turbine Blade using Genetic
Algorithm", International Journal of Engineering
Research & Technology, Volume 3, No. 12,
pp. 875-882, December, 2014. |
21. |
Li, H.,and Chen, Z., "Design Optimization and Site
Matching of Direct-Drive Permanent Magnet Wind
Power Generator Systems", Renewable Energy,
Volume 34, pp. 1174–1185, 2009. |
|
|
|