Phase and Micro-Structural Characterization of Sanitary-Ware Fired at Different Temperature
Keywords: Clay, Flux, Mullite, Soda Glass, Filler
Mehran University Research Journal of Engineering & Technology
Volume 36 , Issue 3
ATHER HASSAN , YASEEN IQBAL , SYED ZAFAR ILYAS ,
References
1. |
Graham, S., "Trends for Material Suppliers", Asian Ceramics, pp. 12-23, July, 1998 |
2. |
Klein, A.A., "Constitution and Microstructure of Porcelain", National Bureau of Standards & Technological Paper, Volume 80, pp. 3-38, 1916-1917 |
3. |
Weymouth, J.H., and Williamson, W.O., "Some Observation on the Micro-structure of Fired Earthenware", Transaction of British Ceramic Society, Volume 52, pp. 311-328, 1953. |
4. |
Jackson, G., "Sanitary Ware", Journal of British Ceramic Society, Volume 5, pp. 128-134, 1968.
|
5. |
Cole, W.F., "Moisture Expansion", Aspects of Early Australian Experience, Transaction & Journal of British Ceramic Society, Volume 82, 1983 |
6. |
Lee, W.E. and Iqbal, Y., "Influence of Mixing on Mullite Formation in Porcelain", Journal of European Ceramic Society , Volume 21,No. 14, pp. 2583-2586, 2001 |
7. |
Manfredini, T., and Pellacani, G.C.,"Engineering Materials Hand Book Ceramics and Glasses", Tile White Ware, Volume 4, pp. 925-42, Department of Chemistry, University of Modena, Italy, 1991 |
8. |
McConville, C.J., Lee, W.E., and Sharp, J.H., "Microstructural Evolution in Fired Kaolinite", Transactionon British Ceramic, Volume 4, pp. 162-68,1998 |
9. |
Guanzhou, Q., Jiang, T., Li, G., Fan, X., and Huang, Z., "Activation and Removal of Silicon in Kaolinite by Thermo-Chemical Process", Journal of Metallurgy, Volume 33, pp. 121-128, Scandinavian, 2004 |
10. |
Iqbal, Y. and Lee, W.E., "Fired Porcelain Micro-Structures Revisited", Journal of American Ceramic Society, Volume 82, No. 12, pp. 3584-90, 1999 |
11. |
Schramm, E., and Hall, F.P., "The Fluxing Effect of Feldspar in White Ware Bodies", Journal of American Ceramic Society, pp. 159-168, 1936 |
12. |
Schuller, K.H., "Reaction between Mullite and Glassy Phase in Porcelain", Transaction of British Ceramic Society, Volume 63, No. 2, pp. 103-17, 1964 |
13. |
Iqbal, Y.,and Lee, W.E., "Micro-Structural Evolution in Tri-Axial Porcelain", Journal of American Ceramic Society, Volume 83, No. 12, pp. 3121-3127, 2000 |
14. |
Morey, G.W., and Bowen, N.L., "The System KAlSi2O6", Journal of American Ceramic Society, Volume 5, pp. 1-21,1922 |
15. |
Maiti, K.N., and Kumar, S., "Microstructure and Properties of a New Porcelain Composition Containing Crystallizing Glasses as Replacement for Feldspar", Transaction on British Ceramic, Volume 91, pp. 19-24, 1992. |
16. |
Kobayshi, Y., Ohira, O., Ohasahi, Y., and Kato, A., "Effact of Glaze on Bending Strength of High Strength White-Ware Bodies", Journal of Japan Ceramic Society, Volume 5, No. 98, pp. 504-509,1990. |
17. |
Palmonari, C., Esposito, L., Tucci, A., and Timellini, G., "Short Fiber Reinforced Ceramic Tiles", Silicate Industries, pp. 3-4,1996 |
18. |
Youssef, N.F., Abadir, M.F., and Shater, M.A.O., "Utilization of Soda Glass (Cullet) in the Manufacture of Wall and Floor Tiles", Journal ofEuropean Ceramic Society, Volume 18, pp. 1721-1727, 1998 |
19. |
Vaughan, F., and Dinsdale, A., "Moisture Expansion", Transaction of British Ceramic Society, Volume 6, pp.1-62.
|
20. |
Sallam, E.M.M., Messer, P.F., and Ford, W.F., "Equilibrium Constitution as an Index of the Verification of Tri-Axial White Wares", Transaction and Journal of British Ceramic Society, Volume 75, 1976.
|
21. |
Lundin, S.T., "Microstructure of Porcelain, Microstructure of Ceramic Materials", Proceedings of American Ceramic Society Symposium, National Bureau of Standards Miscellaneous Publications No. 257, National Bureau of Standards, MD, pp. 93-106, Gaithersburg, 1964 |
22. |
Knudsen, F.P., Journal of American Ceramic Society, Volume 42, No. 8, pp. 376, 1959 |
23. |
Dinsdale A., and Wilkinson, W.T., "Strength of White Ware Bodies", Journal of British Ceramic Society, Volume 6, June, 1966.
|
24. |
Bradi, R.C., "A High Tech Approach to a Traditional Ceramic- The Toughness of Porcelain", Proceedings of International Symposium on fire Ceramics, Volume 86, pp. 17-22, Arita, 1986 |
25. |
Mackenzie, W.S., and Smith, J.V., "The Alkali Feldspar: 111 An Optical and X-Ray Study of High Temperature Feldspar", American Mineral, Volume 41, Nos. 5-6, pp. 405-427,1956 |
26. |
McConvile, C.J., "Related Microstructural Development on Firing Kaolinite, Illite and Smectite Clays", Thesis, Department of Engineering Materials, University of Sheffield, 1999 |
27. |
Kobyashi, Y., Ohira, O., Ohashi, Y., and Kato, E., "Effect of Firing Temperature on Bending Strength of Porcelain for Table Ware", Journal of America Ceramic Society, Volume 75, No. 7,pp.1801-1806, 1992 |
28. |
Kobayashi, Y., Ohira, O., Ohashi, Y., and Kato, E., "Verification of White Ware Bodies in Alumina, Feldspar, Kaolin System", Journal of Japan Ceramic Society, Volume 100, No. 5,pp.743-749, 1992 |
29. |
Durr Ceramics Factory, Industrial Estate Hayat Abad Peshawar |
|
|
|