Mehran University Research Journal Of Engineering &
Technology (HEC Recognized In Category "X")
Publishing Since 1982.



For Authors
For Readers
Article Information  
Sustainability Assessment for Dry, Conventional and Cryogenic Machining in Face Milling of Ti-6Al-4V

Keywords: Cryogenic Cooling, Face Milling, Sustainable Machining

Mehran University Research Journal of Engineering & Technology

Volume 36 ,  Issue 2

IMRAN  MASOOD , MIRZA JAHANZAIB   , AHMAD WASIM   ,

References
1. Zhai, Y., and Dornfeld, "A Three Dimensional System Approach for Environmentally Sustainable Manufacturing", CIRP Annals-Manufacturing Technology, Volume 61, pp. 39-42, France, 2012
2. Yoshikawa, J., Boër, A., and Williams, W., "The Incoming Global Technological and Industrial Revolution Towards Competitive Sustainable Manufacturing", CIRP Annals-Manufacturing Technology, Volume 57, pp. 641-659, France, 2008.
3. Lee and Badrul, "Optimization for Sustainable Manufacturing Based on Axiomatic Design Principles: A case Study of Machining Processes", Advances in Production Engineering & Management, Volume 9, pp. 31-43, Slovenia, 2014.
4. Hesselbach, H., Öhlschläger, B.Z., and Dettmer, "Ecologically Benign Lubricants–Evaluation from a Life Cycle Perspective", CLEAN–Soil, Air, Water, Volume 35, pp. 427-432, Germany, 2007.
5. Inasaki, S.W., and Wakabayashi, "Dry Machining and Minimum Quantity Lubrication", CIRP Annals- Manufacturing Technology, Volume 53, pp. 511-537, France, 2004
6. Kopac, and Pusavec, "Sustainability Spirit in Manufacturing/Machining Processes", International Conference on Management of Engineering & Technology, PICMET., pp. 1197-1205, USA, 2009.
7. Westkämper, "Manufuture and Sustainable Manufacturing", Manufacturing Systems and Technologies for the New Frontier, Springer, pp. 11-14, Japan, 2008
8. Ezugwu, "Key Improvements in the Machining of Difficult-to-Cut Aerospace Superalloys", International Journal of Machine Tools and Manufacture, Volume 45, pp. 1353-1367, UK, 2005.
9. Deshpande, P., Kopaè, M.D., and Jawahir, "Modeling and Optimization of Machining of High Temperature Nickel Alloy for Improved Machining Performance and Enhanced Sustainability", Proceedings of 11th CIRP Conference on Modeling of Machining Operations, USA, 2008.
10. Devillez, D., Larrouquere, M.Z., and Vigneau, "A Review of Developments Towards Dry and High Speed Machining of Inconel 718 Alloy", International Journal of Machine Tools and Manufacture, Volume 44, pp. 439-456, UK, 2004.
11. Ezugwu, and Bonney, "Effect of High-Pressure Coolant Supply when Machining Nickel-Base, Inconel 718, Alloy with Coated Carbide Tools", Journal of Materials Processing Technology, Volume 153, pp. 1045-1050, Germany, 2004
12. Kramar, and Kopac, "High Performance Manufacturing Aspect of Hard-to-Machine Materials", Journal of Advances in Production Engineering & Management, Volume 1, p. 2, Slovenia, 2009
13. Li, S.E., Iqbal, and Xiao, X., "Refrigerated Cooling Air Cutting of Difficult-to-Cut Materials", International Journal of Machine Tools and Manufacture, Volume 47, pp. 927-933, UK, 2007.
14. Marksberry, "Micro-Flood (MF) Technology for Sustainable Manufacturing Operations that are Coolant Less and Occupationally Friendly", Journal of Cleaner Production, Volume 15, pp. 958-971, Netherlands, 2007
15. Marksberry, "An Assessment of Tool-Life Performance in NDM (Near Dry Machining) for Sustainable Manufacturing of Automotive Steel Components", Dissertation, Department of Mechanical Engineering, College of Engineering, University of Kentucky, USA, 2004.
16. Yan, Y., and Liu, "Influence of Minimum Quantity Lubrication Parameters on Tool Wear and Surface Roughness in Milling of Forged Steel", Chinese Journal of Mechanical Engineering, Volume 25, pp. 419-429, China, 2012.
17. Yildiz, and Nalbant, "A Review of Cryogenic Cooling in Machining Processes", International Journal of Machine Tools and Manufacture, Volume 48, pp. 947-964, UK, 2008.
18. Jawahir, and Dillon, "Sustainable Manufacturing Processes: New Challenges for Developing Predictive Models and Optimization Techniques", Proceedings of 1st International Conference on Sustainable Manufacturing, pp. 1-19, Canada, 2007
19. Ghosh, Z., and Frey, "Cryogenic Machining with Brittle Tools and Effects on Tool Life", ASME International Mechanical Engineering Congress and Exposition, pp. 201-209, USA, 2003
20. Khan, D.K., and Chattopadhyay, "Effects of Cryogenic Cooling by Liquid Nitrogen Jets on Tool Wear, Surface Finish and Dimensional Deviation in Turning Different Steels", International Journal of Machining and Machinability of Materials, Volume 1, pp. 115-131, Portugal, 2006.
21. Silva, D., Machado, F.E., and Souza, Jr., "Performance of Cryogenically Treated HSS Tools", Wear, Volume 261, pp. 674-685, USA, 2006.
22. Cus, and Balic, "Optimization of Cutting Process by GA Approach", Robotics and Computer-Integrated Manufacturing, Volume 19, pp. 113-121, USA, 2003
23. Olteanu, Bisu, and Tanase, "Determination of Power Consumption in Milling", Scientific Bulletin, Series-D, University Politehnica of Bucharest. pp. 211-220, Romania,2013.
24. Aramcharoen, and Chuan, "An Experimental Investigation on Cryogenic Milling of Inconel 718 and its Sustainability Assessment", Procedia CIRP, Volume 14, pp. 529-534, France, 2014.